PIMPyour bait elastic container

Come on now, ante up! Give us your tips and tricks, those little snippets and trade secrets gleaned from years of experience and experimentation!

Moderator: Seaniebo

Message
Author
murnblood
SAI Bait Ball
Posts: 54
Joined: Sun May 25, 2008 4:20 pm
Location: Wexford (Blow In)

PIMPyour bait elastic container

#1 Post by murnblood »

Sick of your bait elastic disappearing back into the container, and it normally happens on the coldest wettest nights.

I took the insert out of a drinks bottle, lucozade sport (I think it was) and planted it onto the top of my container and it works a treat. It is easier to thread the elastic through and it stops the elastic going back into the container, see attached photo.
i will post the method that I used later.
You do not have the required permissions to view the files attached to this post.
Last edited by murnblood on Thu Oct 02, 2008 4:40 pm, edited 1 time in total.
"The gods do not subtract from the allotted span of men's lives the hours spent on fishing." WHALE,OIL,BEEF,HOOKED ><(((((º>
User avatar
seanie35
SAI Megalodon!
Posts: 2197
Joined: Tue Aug 26, 2008 8:35 pm
Favourite Rod: shimano beastmaster bass rod
Favourite Reel: shimano ultrega
Favourite Fish: anything with a spin
Location: west waterford

Re: PIMPyour bait elastic container

#2 Post by seanie35 »

thats a cracking idea, :idea: :idea: :idea: , never used one because 'thread always went back in'
Species....good film.....I'll get my coat
WrasseBasher
SAI Hammerhead
Posts: 283
Joined: Fri Sep 07, 2007 7:27 pm
Location: Dublin

Re: PIMPyour bait elastic container

#3 Post by WrasseBasher »

EXCELLENT IDEA, OFF TO UPGRADE IT NOW :D
SPECIES 2010 (16)
COD..POLLOCK..LING..POUTING..COALIE..POOR COD..WHITING..GREY GURNARD..DAB..FLOUNDER..SMOOTHHOUND..DOGFISH
MACKEREL..TWAITE SHAD..BALLAN WRASSE..CUCKOO WRASSE..
User avatar
JOHN LYNCH
Inactive
Posts: 660
Joined: Thu Mar 30, 2006 1:55 pm
Location: AnglingIreland.com TackleBox.ie

Re: PIMPyour bait elastic container

#4 Post by JOHN LYNCH »

Thats a good idea alright, used to hate the way the elastic kept pulling itself back into the container.
murnblood
SAI Bait Ball
Posts: 54
Joined: Sun May 25, 2008 4:20 pm
Location: Wexford (Blow In)

Re: PIMPyour bait elastic container

#5 Post by murnblood »

Get a lid from a lucozade sport bottle and push the white plastic insert out with a pointed tool.
Then use a 10mm drill bit to make a hole in the container lid and glue the bottle top into the lid using super glue.
SIMPLE :wink:
"The gods do not subtract from the allotted span of men's lives the hours spent on fishing." WHALE,OIL,BEEF,HOOKED ><(((((º>
Kraken
SAI Sea Dog!
Posts: 561
Joined: Fri Aug 18, 2006 10:55 pm
Location: Dungarvan, Co.Waterford

Re: PIMPyour bait elastic container

#6 Post by Kraken »

what stops it going back in??

Dont understand..... :oops:
2009 Species:- Whiting, Dogfish, [color=#FF0000][b]Bass[/b][/color], 3 Bearded Rockling

PB Casting Distances:- [color=#BF0000]when I hit 200 I'll post it here[/color]

IFSA No.
SACN No. 0714

Steal a little and they throw you in jail.....Steal a lot and they make you King!!!!!!!!
User avatar
Danny M.
SAI Megalodon!
Posts: 1063
Joined: Tue Jun 19, 2007 6:56 am
Favourite Rod: 702L
Favourite Reel: Twin Power
Favourite Fish: A live one.
Location: Wexford Town

Re: PIMPyour bait elastic container

#7 Post by Danny M. »

Kraken wrote:what stops it going back in??

Dont understand..... :oops:


The flappy yoke :lol:

Its like the valves they stick in people when their arteries give a bit of trouble.

Hey murnblood that can be your next project; pimp my Artery :mrgreen:
Give the HSE a run for thier money !
murnblood
SAI Bait Ball
Posts: 54
Joined: Sun May 25, 2008 4:20 pm
Location: Wexford (Blow In)

Re: PIMPyour bait elastic container

#8 Post by murnblood »

Its like a little rubber non return valve.

Enlarge the photo to see.
"The gods do not subtract from the allotted span of men's lives the hours spent on fishing." WHALE,OIL,BEEF,HOOKED ><(((((º>
Kraken
SAI Sea Dog!
Posts: 561
Joined: Fri Aug 18, 2006 10:55 pm
Location: Dungarvan, Co.Waterford

Re: PIMPyour bait elastic container

#9 Post by Kraken »

murnblood wrote:Its like a little rubber non return valve.

Enlarge the photo to see.



how do i enlarge it?

jeesus i feel stupid.............. :oops: :oops: :oops: :oops: :oops:
2009 Species:- Whiting, Dogfish, [color=#FF0000][b]Bass[/b][/color], 3 Bearded Rockling

PB Casting Distances:- [color=#BF0000]when I hit 200 I'll post it here[/color]

IFSA No.
SACN No. 0714

Steal a little and they throw you in jail.....Steal a lot and they make you King!!!!!!!!
murnblood
SAI Bait Ball
Posts: 54
Joined: Sun May 25, 2008 4:20 pm
Location: Wexford (Blow In)

Re: PIMPyour bait elastic container

#10 Post by murnblood »

There is an alternative to the bottle top.

You could just glue a piece of rubber to the lid (e.g a bit of inner tube) put a tiny slit into it and push the thread through it.

Cant see that not working either.
"The gods do not subtract from the allotted span of men's lives the hours spent on fishing." WHALE,OIL,BEEF,HOOKED ><(((((º>
Kraken
SAI Sea Dog!
Posts: 561
Joined: Fri Aug 18, 2006 10:55 pm
Location: Dungarvan, Co.Waterford

Re: PIMPyour bait elastic container

#11 Post by Kraken »

aaah right - now i got it

cud use top of a kids sippy cup too :D :D :D
2009 Species:- Whiting, Dogfish, [color=#FF0000][b]Bass[/b][/color], 3 Bearded Rockling

PB Casting Distances:- [color=#BF0000]when I hit 200 I'll post it here[/color]

IFSA No.
SACN No. 0714

Steal a little and they throw you in jail.....Steal a lot and they make you King!!!!!!!!
murnblood
SAI Bait Ball
Posts: 54
Joined: Sun May 25, 2008 4:20 pm
Location: Wexford (Blow In)

Re: PIMPyour bait elastic container

#12 Post by murnblood »

Kraken wrote:aaah right - now i got it

cud use top of a kids sippy cup too :D :D :D


BINGO!!!!
"The gods do not subtract from the allotted span of men's lives the hours spent on fishing." WHALE,OIL,BEEF,HOOKED ><(((((º>
gearoid mc s.
SAI Megalodon!
Posts: 1108
Joined: Wed Oct 26, 2005 5:05 pm
Favourite Rod: Scorpion Sport
Favourite Reel: SHV30

Re: PIMPyour bait elastic container

#13 Post by gearoid mc s. »

should have patented that and sold it to a production company...seriously like.
murnblood
SAI Bait Ball
Posts: 54
Joined: Sun May 25, 2008 4:20 pm
Location: Wexford (Blow In)

Re: PIMPyour bait elastic container

#14 Post by murnblood »

gearoid mc s. wrote:should have patented that and sold it to a production company...seriously like.

DOH!!! :cry:
"The gods do not subtract from the allotted span of men's lives the hours spent on fishing." WHALE,OIL,BEEF,HOOKED ><(((((º>
User avatar
round_ourway
SAI Megalodon!
Posts: 2539
Joined: Tue Aug 01, 2006 1:44 pm
Favourite Rod: Zziplex HSM
Favourite Reel: Daiwa 7ht Turbo
Favourite Fish: Thornback Ray
Location: Belfast

Re: PIMPyour bait elastic container

#15 Post by round_ourway »

cracking idea mate. 'I have offically been pimped' hehe
Boca Bearings .com - Orange Seal

Practice the Impossible
User avatar
thescotsman
SAI Sea Dog!
Posts: 638
Joined: Wed Jun 07, 2006 11:33 pm
Location: Carrigaline

Re: PIMPyour bait elastic container

#16 Post by thescotsman »

bit more low tech and not so stylish, but i find an elastic band round the container with the thread underneath it works fine.
2019 Species (8): Whiting, Coalfish, Dogfish, Bass, Coalfish, Dab, Lesser Spined Sea Scorpion, 5 Bearded Rockling
User avatar
immunecfg
SAI Sea Dog!
Posts: 552
Joined: Fri May 30, 2008 11:04 am
Location: Belfast

Re: PIMPyour bait elastic container

#17 Post by immunecfg »

This is one thing that drives me mad baiting up then getting ur elastic "ARGH IS GONE BACK INSIDE!!!!" then after spending about 10 mins messing about with the thread, this idea will be used for the next time im out!

Very good Idea there!
Species 2011: [color=#FF0000]Bass (FINALLY), Mullet, Flounder, Mackeral, Pollock, Coal fish.[/color]


-----------------------------------------------
User avatar
contender
SAI Hammerhead
Posts: 372
Joined: Sun Nov 12, 2006 8:15 pm
Location: Belfast

Re: PIMPyour bait elastic container

#18 Post by contender »

Good thinking there. i will have to try to pimp mine up soon. I normally just go for the covered in bait and stinking look. :D
User avatar
red
SAI Megalodon!
Posts: 1666
Joined: Tue Oct 14, 2008 4:30 pm
Location: cork

Re: PIMPyour bait elastic container

#19 Post by red »

slightly off topic but still a way to "pimp" the container. i got some glow in the dark paint on ebay for the tip of my rod. i put a bit onto my elastic container and it works a treat if it falls off my box at night. you can see it glowing on the rocks or sand. hell of a lot easier than walking around with the headlamp glued to the ground looking for it.
User avatar
lumpy
SAI Megalodon!
Posts: 1474
Joined: Mon Nov 21, 2005 6:22 pm
Favourite Rod: conoflex nemesis plus slr
Favourite Reel: Daiwa SL30SHV
Favourite Fish: Bull Huss, flounder
Location: clonakilty, co cork

Re: PIMPyour bait elastic container

#20 Post by lumpy »

as red said i did similar with my container but used reflective tape from halfords. also put it on my scissors, forceps, knife etc. its a gift for finding them in the sand
shore species 2008(25):dogfish(3.1lbs), bull huss (12lb 2oz), bass, shore rockling, coalie, whiting, pollack, conger (22.4lbs),flounder, thick lipped mullet (4.8lbs),turbot,ling (11.2lbs),ballan wrasse(4.5lbs), cuckoo wrasse, pouting, poor cod, cod (9.5lbs), dab, 3 bearded rockling, long spined scorpion fish, corkwing wrasse, plaice, trigger fish, sea trout, garfish


regards neil

Return to “Tips & Tricks for Sea Anglers”