lead loop wires for moulds?

Message

#1 Post by **ste c** » Thu Sep 13, 2012 8:30 pm

hows tricks lads have got these before ages ago but cant remember where i got them have ran out,just wondering does anyone know where i can buy these in bulk most places on ebay wont deliver to ireland and cant find any fishing shops that stock them most havent a clue what im on about this is them cheers

http://www.ebay.ie/itm/100-LONGTAIL-LEA ... 597wt_1037

#2 Post by **JOHN1** » Thu Sep 13, 2012 8:49 pm

very easy to make your own

#3 Post by **EricH** » Thu Sep 13, 2012 9:11 pm

https://www.veals.co.uk/acatalog/long-t ... -1932.html

Veals have them in stock

#4 Post by **ste c** » Thu Sep 13, 2012 9:55 pm

JOHN1 wrote:very easy to make your own

i use to hammer 2 nails close to each other in a block of wood and bend a bike spoke around them but they were very thick

#5 Post by **ste c** » Thu Sep 13, 2012 9:58 pm

EricH wrote:https://www.veals.co.uk/acatalog/long-tail-wires-dca-style-1932.html

Veals have them in stock

thanks mate thats them

#6 Post by **dac69696969** » Sat Sep 15, 2012 1:51 am

Did you try Southside angling??? I'm sure I got some off of them about a year ago. Could have been when buying a mould but the lads normally try to sort out anything for you

#7 Post by **lugworm** » Sat Sep 15, 2012 2:05 am

make ur own using either welding rods, or old coat hangers

#8 Post by **spidercrab** » Sat Sep 15, 2012 7:51 pm

http://www.uk-hooks.com/details.php?selected=399

#9 Post by **ste c** » Sun Sep 16, 2012 5:15 pm

lugworm wrote:make ur own using either welding rods, or old coat hangers

welding rods are too bendy and also found coat hangers to be too thick have just ordered from veals cheers

#10 Post by **eoghanb** » Mon Sep 24, 2012 10:16 pm

Use hair pins the long u shaped ones

#11 Post by **sandblaster** » Tue Sep 25, 2012 2:51 pm

get your hands on some stainless steel welding rods or wires anyone involved in welding/engineering will help you out and they are dirt cheap and can be got in the same thickness as the wire on the grip leads you buy .they can also be cut to any size you want-have been using these for years.hope this helps,
noel.

Sea Angling Ireland

lead loop wires for moulds?

lead loop wires for moulds?

Re: lead loop wires for moulds?

Re: lead loop wires for moulds?

Re: lead loop wires for moulds?

Re: lead loop wires for moulds?

Re: lead loop wires for moulds?

Re: lead loop wires for moulds?

Re: lead loop wires for moulds?

Re: lead loop wires for moulds?

Re: lead loop wires for moulds?

Re: lead loop wires for moulds?