avet sx

[zziplex]

lads i have a lefthand avet sx that i need to mag as its to quick to control iam currently fishing with abu 6501 pro rockets which i have converted myself to a ct cage complete with brass bullet i know nothing of knobby converting a avet how hard is it all i know if im right is drill a 8mm hole on side plate .i have never seen a mag unit can i buy one in irelandand can i get one fitted if its difficult .lads any info would be greatly appreciated thanks paudie

[The Austrian]

you can buy an upgrade body kit here: http://cgi.ebay.ie/Avet-SX-MC-Cast-magg ... 1|294%3A50
None available here in Ireland as far as I know, but bought from this US shop before and only can recommend their service, or treat yourself to the magged version: http://cgi.ebay.ie/Avet-SX-5-3-MAGGED-N ... 1|294%3A50

[zziplex]

thanks for the info but my reel is the older sx 5.1 not the newer sx 5.3 .i was looking at buying the new
version but its costly and my reel is in its original box hardly used the mag upgrade looks good does it cast good and ho does it compare to the abu rockets

[The Austrian]

thanks for the info but my reel is the older sx 5.1 not the newer sx 5.3 .i was looking at buying the new
version but its costly and my reel is in its original box hardly used the mag upgrade looks good does it cast good and ho does it compare to the abu rockets

don't know about the rocket but find the avet handy enough for casting, no backlashes yet *touch wood* and very precise runs every time, even with smaller baits and braid, mags are easy enough to adjust to suit your casting style.

[paul mason]

As far as i know all you have to do is stick a rare earth magenet on the end plate and this will control it. It's fairly simple or so i'm told

[fishinmidget]

As far as i know all you have to do is stick a rare earth magenet on the end plate and this will control it. It's fairly simple or so i'm told

Wot he says. just find some glue that bonds metal, and stick a nice sized rare earth magnet or two in the end plate. try to get them as close to the spool as possible without them touching the actual spool. this worked fine for me.

[paddyc]

Id presume there easy enough to magg!! but contact Chris Macey in the Wales, http://homepage.ntlworld.com/christopher.macey/
he maggs Avets and i highly racomend his work, been using him a good while now and he is top notch,fast turn around too and a great guy. Hope this helps

For anyone interested Tom B (aka Rockhopper/ tburness@eircom.net) imports Avet reels and does them at a very reasonable price too,
models include-SX/MX/LX and another i cant remember off hand.

[zziplex]

thanks paddyc for the info must e mail him the sx is too nice a reel to leave in its box