Saltwater Fly Fishing rod for mullet

Probably the fastest growing arm of the sport, here is a forum dedicated to the art. Beginners like myself welcome.

Moderators: Tanglerat, lumpy

Message
Author
User avatar
merv147
SAI Hammerhead
Posts: 365
Joined: Sun Mar 19, 2006 9:58 pm
Favourite Rod: Penn villain
Favourite Reel: Penn 535
Favourite Fish: pollack
Location: Larne Co.Antrim

Saltwater Fly Fishing rod for mullet

#1 Post by merv147 »

i need help i am thinking of takeing this up in the summer but i am looking for a kit that is cheep under £100 and that will do for Pollock fishing as well can any one help me :?:
User avatar
MAC
SAC Treasurer
Posts: 4331
Joined: Tue Jun 29, 2004 1:47 pm
Location: Too far from Water

#2 Post by MAC »

mmm.... Believe it or not this one is a little on the difficult side.... You will need a slightly heavier rod for the Pollock than for the mullet, especially if you are fishing for Pollock in any onshore wind, even light. If I HAD to choose just one rod for both I would go with an 8 weight. Have a look at some of the online stores and ebay.... There will be plenty of options. Buy a cheap rod to start with and if you get into the sport you can look at a rod for Pollock and Mullet fishing.

Kev
><º> ><º>

><º>
User avatar
fishinmidget
Casting Tart
Posts: 1829
Joined: Tue May 09, 2006 9:23 pm
Favourite Rod: Daiwa TDXS 129pm
Favourite Reel: Daiwa 7ht Turbo
Favourite Fish: Anything
Location: Was Galway, but sadly now its landlocked London

#3 Post by fishinmidget »

If you are looking at an 8# then look at the shakespear adlantis salt. its quite a good rod for the money.
SACN number: 0688

Le rosbif......
User avatar
lumpy
SAI Megalodon!
Posts: 1474
Joined: Mon Nov 21, 2005 6:22 pm
Favourite Rod: conoflex nemesis plus slr
Favourite Reel: Daiwa SL30SHV
Favourite Fish: Bull Huss, flounder
Location: clonakilty, co cork

#4 Post by lumpy »

i'd second that, an 8 wt will struggle wit a pollock over 5lbs in kelpy conditions.have heard very good reports about the atlantis. what i would do though is invest in a quality fly line, if only one look at a an intermediate, as it is extremely difficult to catch pollack on a floater, need very specific conditions for success.if you do enjoy it you can always invest later.
shore species 2008(25):dogfish(3.1lbs), bull huss (12lb 2oz), bass, shore rockling, coalie, whiting, pollack, conger (22.4lbs),flounder, thick lipped mullet (4.8lbs),turbot,ling (11.2lbs),ballan wrasse(4.5lbs), cuckoo wrasse, pouting, poor cod, cod (9.5lbs), dab, 3 bearded rockling, long spined scorpion fish, corkwing wrasse, plaice, trigger fish, sea trout, garfish


regards neil
ts1500

#5 Post by ts1500 »

check out http://www.tacklebargains.com for lines you can get an intermediate that casts fantastically, i was using it at the weekend for £10!
you could prob get a rod/reel on here to, depending what your after!
User avatar
lumpy
SAI Megalodon!
Posts: 1474
Joined: Mon Nov 21, 2005 6:22 pm
Favourite Rod: conoflex nemesis plus slr
Favourite Reel: Daiwa SL30SHV
Favourite Fish: Bull Huss, flounder
Location: clonakilty, co cork

#6 Post by lumpy »

try the Lefty Kreh Series One 9ft #8 - 2 piece on this web site. buddy of mine has this and the 10wt and loves them.not the fastest actioned rod which makes them a wee bit more user friendly as well as they are at a good price.have thought about getting the 7wt for mullet and macks
shore species 2008(25):dogfish(3.1lbs), bull huss (12lb 2oz), bass, shore rockling, coalie, whiting, pollack, conger (22.4lbs),flounder, thick lipped mullet (4.8lbs),turbot,ling (11.2lbs),ballan wrasse(4.5lbs), cuckoo wrasse, pouting, poor cod, cod (9.5lbs), dab, 3 bearded rockling, long spined scorpion fish, corkwing wrasse, plaice, trigger fish, sea trout, garfish


regards neil
User avatar
merv147
SAI Hammerhead
Posts: 365
Joined: Sun Mar 19, 2006 9:58 pm
Favourite Rod: Penn villain
Favourite Reel: Penn 535
Favourite Fish: pollack
Location: Larne Co.Antrim

#7 Post by merv147 »

i have a trout rod in the house 5-6# would it do for mullet do you think
User avatar
fishinmidget
Casting Tart
Posts: 1829
Joined: Tue May 09, 2006 9:23 pm
Favourite Rod: Daiwa TDXS 129pm
Favourite Reel: Daiwa 7ht Turbo
Favourite Fish: Anything
Location: Was Galway, but sadly now its landlocked London

#8 Post by fishinmidget »

yes but only in the flat calm and u wont have much distance.
SACN number: 0688

Le rosbif......
User avatar
lumpy
SAI Megalodon!
Posts: 1474
Joined: Mon Nov 21, 2005 6:22 pm
Favourite Rod: conoflex nemesis plus slr
Favourite Reel: Daiwa SL30SHV
Favourite Fish: Bull Huss, flounder
Location: clonakilty, co cork

#9 Post by lumpy »

might be suitable for mullet, have taken them on a 5wt when its calm.you should still get a 60ft cast with a 5/6 wt. could possibly be an idea to use this for the mullet and get a 9wt for pollack and possibly bass
shore species 2008(25):dogfish(3.1lbs), bull huss (12lb 2oz), bass, shore rockling, coalie, whiting, pollack, conger (22.4lbs),flounder, thick lipped mullet (4.8lbs),turbot,ling (11.2lbs),ballan wrasse(4.5lbs), cuckoo wrasse, pouting, poor cod, cod (9.5lbs), dab, 3 bearded rockling, long spined scorpion fish, corkwing wrasse, plaice, trigger fish, sea trout, garfish


regards neil
User avatar
MAC
SAC Treasurer
Posts: 4331
Joined: Tue Jun 29, 2004 1:47 pm
Location: Too far from Water

#10 Post by MAC »

I go with Lumpy on that one as well Merv. Use the 5/6 weight for the mullet and get a 9wt for Pollock / Bass

KEv
><º> ><º>

><º>

Return to “Saltwater Fly Fishing”