Primo Synchro XL ring spacings

[m.b3]

anyone have the ring spacings for this rod for low reel? on the ring spacing charts it only references the high reel position and the fixed spool. should i use the primo low reel spacings? be very grateful for any help. mark

PRIMO MULTIPLIER LOW REEL 4 9 15 23 33 48 68 93 8+Tip
PRIMO RANGE FIXED SPOOL 5 12 22 36 57 85 6+Tip
PRIMO RANGE MULTIPLIER 4 9 15 22 31 43 63 93 8+Tip
PRIMO SYNCHRO FIXED SPOOL 6 14 24 38 56 81 6+Tip
PRIMO SYNCHRO MULTIPLIER 5 11 18 26 35 47 65 and 6" Down from top of butt. 8+Tip

[paddyc]

Hi Mark, in inches 5,,10-5,,18,,27,,40,,54-5,,73,, butt ring is 13 down. I use these for low reel on Synchro XL and FT XL. Hope this helps

[m.b3]

that's great Paddy thanks for that i will tape them on and give it a few casts and see how i go before building it. hope all is well. mark

[m.b3]

just double checked there and the tip section on my last build is 5,11,18...inches so it is very close to what you have recommended. my problem is i am getting some rubbing of the line on the blank when casting as the thin reflective tape is getting worn slightly. more reason to tape the rings on and play around first i suppose.

[kstaff]

Hi Mark

I had a Synchro XL, awesome rod, where did you get it?

[m.b3]

hello sir! i got one off Tom/ Rockhopper a few years ago now. learning to backcast with it. so far they are going straight