Looks like 0.2mm 28lb breaking strain is now available.
Sounds too good ?
http://www.tacklebox.co.uk/lines/braids ... -270m.html
Berkley Nanofil
Moderators: Seaniebo, corbyeire
-
- SAI Bait Ball
- Posts: 149
- Joined: Fri Apr 27, 2012 11:43 am
Berkley Nanofil
No advertising!
-
- SAC Treasurer
- Posts: 4331
- Joined: Tue Jun 29, 2004 1:47 pm
- Location: Too far from Water
Re: Berkley Nanofil
From what I have seen of this line so far all I can say is I will not be using it. I performed a very simple test on a spool. Wrap each end around a piece of broom handle and pull until the line breaks. I tested 20lb nanofill if I remember correctly. It broke very easily in the middle. This was tested on about a 6 foot lenght of line and I tested a few times as I could not believe the results...
. I would guess that it broke well below 10lb of pressure... it snapped quite easily to be honest. The line looks great, but it's doesn't appear to be up to the job from what I have seen.
Kev

Kev
><º> ><º>
><º>
><º>
-
- Moderator
- Posts: 3083
- Joined: Wed Jan 29, 2003 5:18 pm
- Location: Cork
Re: Berkley Nanofil
I have been using .13 - 6.93kg Nanofil for a while. I have found it to be "grand", nothing too spectacular but "grand".
I feel that it needs to be at a better price point for anglers to switch to it.
I use Strikewire from StrikePro and think it is the bees knees. The average "super braid" is thinner diameter for braking strain than Nanofil and the price difference has me sticking to my braid. I suppose it will surely come down in price at some point.
I feel that it needs to be at a better price point for anglers to switch to it.
I use Strikewire from StrikePro and think it is the bees knees. The average "super braid" is thinner diameter for braking strain than Nanofil and the price difference has me sticking to my braid. I suppose it will surely come down in price at some point.
-
- SAC Treasurer
- Posts: 4331
- Joined: Tue Jun 29, 2004 1:47 pm
- Location: Too far from Water
-
- SAI Megalodon!
- Posts: 5651
- Joined: Tue Jan 02, 2007 6:15 pm
- Favourite Fish: skimmers
- Location: bray co.wickla
Re: Berkley Nanofil
he didnt mention how to fish with it without using a knot
i take it its knot strenght is poor judging by the way he all but implies you had better double your normal breaking strain
too feckin pricey for me 



EAST COAST BAITBUCKET RAIDER,
thornback specialist
thornback specialist
-
- Moderator
- Posts: 3083
- Joined: Wed Jan 29, 2003 5:18 pm
- Location: Cork
Re: Berkley Nanofil
The knot strength is fine. The problem is that the stuff is so slippery. There are specific knots to use and once you use these there are no problems.
-
- SAI Megalodon!
- Posts: 5651
- Joined: Tue Jan 02, 2007 6:15 pm
- Favourite Fish: skimmers
- Location: bray co.wickla
Re: Berkley Nanofil
when you say slippery is it like braid to knot 

EAST COAST BAITBUCKET RAIDER,
thornback specialist
thornback specialist
-
- Moderator
- Posts: 3083
- Joined: Wed Jan 29, 2003 5:18 pm
- Location: Cork
Re: Berkley Nanofil
Even more slippery than braid!roger de dodger wrote:when you say slippery is it like braid to knot
-
- SAI Megalodon!
- Posts: 5651
- Joined: Tue Jan 02, 2007 6:15 pm
- Favourite Fish: skimmers
- Location: bray co.wickla
-
- Moderator
- Posts: 3083
- Joined: Wed Jan 29, 2003 5:18 pm
- Location: Cork
Re: Berkley Nanofil
It is not as bad as it soundsroger de dodger wrote:

I asked Pure Fishing to give me some samples in various sizes that I could give to anglers that fish in various ways - beach fishing- lure fishing- boat fishing etc. and then I could do a decent review of the stuff. I was impressed by the line and felt it had potential-especially if it was priced "right". It never arrived. Pity. At some stage it will fall in price and then people will start to use it. But for now i stick to the braid i'm used to.