Tapered Shockleader

A forum to discuss casting techniques and events. For the angler wishing to increase his distance and the tournament caster.

Moderators: paddyc, kstaff

Message
Author
The Monk
SAI Lug Worm
Posts: 13
Joined: Fri Sep 25, 2009 11:50 am
Location: Tralee

Tapered Shockleader

#1 Post by The Monk »

Tapered Shockleader i have been using is Daiwa tournament clear and recently not making the standard as it breaks about a foot above the knot when put under pressure, never used to happen before. Any other quality lines out there boys, much appreciated.
[b]Tralee Bay Sea Angling Club www.traleebaysac.org [/b]
User avatar
MC
SAI Megalodon!
Posts: 3852
Joined: Sat Nov 04, 2006 10:21 pm
Favourite Rod: zziplex profile
Favourite Reel: fishing 525,casting abu5500
Favourite Fish: at the minute, any t
Location: Derry

Re: Tapered Shockleader

#2 Post by MC »

when using any tapered shock i normally cut a few feet off so it starts in the thicker stronger line, otherwise i use standard shock leader, using suffix at the minute, it does the job
User avatar
scannerman
SAI Sea Dog!
Posts: 405
Joined: Tue Jun 03, 2008 11:06 pm
Location: irish sea

Re: Tapered Shockleader

#3 Post by scannerman »

never had any confidence in daiwa shock leaders much less tapered types

the narrowness at the thin end too much an inbuilt weakness, they are'nt permitted in tournament casting anyhow

ultima powertex is a great leader

penn tuff stuff another

sakuma standard shock is also pretty ok and very subtle, although not as hard wearing as the above

ultima powertex also comes in a tapered range from 50-70lbs so if your dead set on tapered it would probably be a good choice

varivas also do a tapered shock which comes highly recommended although i recon you'd be hard pressed to find in a tackle shop, its available online however at veals
Last edited by scannerman on Thu Apr 07, 2011 11:53 pm, edited 2 times in total.
only reel men cast!

species 017-zziplex M5, ZZIPLEX FT, Harrison P3 torrix

http://www.youtube.com/user/distancefading
User avatar
cathald
SAI Hammerhead
Posts: 280
Joined: Sat Jul 24, 2010 11:16 pm
Location: inishowen

Re: Tapered Shockleader

#4 Post by cathald »

I've been using both the Daiwa tapered and the Ultima tapered and find them both grand
I normally cut of the first few feet as has been said.
I find the Ultima in yellow good to spot when night fishing
2011 species so far
coalfish,plaice,dab flounder,turbot,sea trout,thornback ray,pollock,ling,mackeral



One day.. Facebook, Youtube, Myspace and Friendster will come together as one. It will be called, FookYouMyFriend.
User avatar
roooster
SAI Hammerhead
Posts: 202
Joined: Sat Apr 04, 2009 7:55 pm
Favourite Fish: bass
Location: east cork

Re: Tapered Shockleader

#5 Post by roooster »

without doubh the varivas taipered leader is miles ahead of the rest & as posted above,i think veals are the only gang that have it....
User avatar
AG
Need your account moneys for new Zziplex
Posts: 1256
Joined: Fri Jan 06, 2006 4:07 pm
Favourite Rod: zziplex
Favourite Reel: abu qtc mag
Favourite Fish: 150 gram lead weight
Location: wicklow

Re: Tapered Shockleader

#6 Post by AG »

tapered leaders are to short for low reel casting so far to dangerous , you have to tie a knot anyway so just use proper laeader material , ultima powerflex , penn tuff stuff etc . trilene gold is very good but very rare ,
User avatar
evan699
SAI Sea Dog!
Posts: 601
Joined: Tue May 12, 2009 4:11 pm
Favourite Rod: Greys grx-s
Favourite Reel: Daiwa 7ht mag
Favourite Fish: Wrasse
Location: cork city

Re: Tapered Shockleader

#7 Post by evan699 »

The Monk wrote:Tapered Shockleader i have been using is Daiwa tournament clear and recently not making the standard as it breaks about a foot above the knot when put under pressure, never used to happen before. Any other quality lines out there boys, much appreciated.
I don't know anything about the tournament casting and all that. But if your using it for fishing like me, to keep the knots and line as weed free as possible then i find bullet tapered shock leader to be good and not too expensive. Also i've found the daiwa to be ok with first few feet trimmed off.
Species 2014: whiting, coalie, pouting, codling, pollack, ballan wrasse, dab, poor cod, mackerel, grey gurnard, conger, ling, cuckoo wrasse, launce, common skate, bass, scad, garfish, blue shark

Species 2015: Ballan wrasse, poor cod, pollack, ling, flounder, turbot, mackerel, whiting, lsd, dab, grey gurnard, pouting, cuckoo wrasse, cod
User avatar
red
SAI Megalodon!
Posts: 1666
Joined: Tue Oct 14, 2008 4:30 pm
Location: cork

Re: Tapered Shockleader

#8 Post by red »

if im using tapered leader i get the varivas 18 to 70lbs, their 13metres so plenty long enough. lost the last leader last night to a snag, the 15lb mainline snapped so at least i know they knot pretty well. just need to get more now :evil:
User avatar
JOHN LYNCH
Inactive
Posts: 660
Joined: Thu Mar 30, 2006 1:55 pm
Location: AnglingIreland.com TackleBox.ie

Re: Tapered Shockleader

#9 Post by JOHN LYNCH »

The Monk wrote:Tapered Shockleader i have been using is Daiwa tournament clear and recently not making the standard as it breaks about a foot above the knot when put under pressure, never used to happen before. Any other quality lines out there boys, much appreciated.
What strenght mainline are you using? if it is stronger than lighter end of the tapered shockleader then the leader should break first (at the knot), make sure than you lube the line well when tieing on the leader.

What knot do you use to tie on the leader? I always use the blood knot when using tapered shock leader.
The Monk
SAI Lug Worm
Posts: 13
Joined: Fri Sep 25, 2009 11:50 am
Location: Tralee

Re: Tapered Shockleader

#10 Post by The Monk »

Cheers for all the replies guys, looks like ill be using up what i have of the daiwa tournament by by cutting off a few feet first before testing out the tapered vavarias or ultima powertex, then ill see how my knots hold up. Thanks again.
[b]Tralee Bay Sea Angling Club www.traleebaysac.org [/b]
JonandDave

Re: Tapered Shockleader

#11 Post by JonandDave »

I know from a thread on another forum that tapered shockleaders are banned on any casting tounament and you must also have 8 turns on the reel with to drop set to max, for me if it aint safe on the field its not safe on the beach, a trick Dave Docwra taught me, t he picked up in the far east from people who make up rigs all day every day, was to use a drop of cooking oil to lubricate the knots, (they used pal oil but any ve oil will do) and really tighten them down with pliers on the tag end and then, as the knot is so tight and small you can blob the tails right up to the knot, the blob helps stop and slip and keeps you free of weed... stronger, safer, and shed loads cheaper than buying leaders and with practice, no worse than the knot you have to tie anyway with a tapered one. Expensive to crack off and loose a tapered leader plus line, plus all your terminal tackle...why risk it?

Cheers

Jon
User avatar
AG
Need your account moneys for new Zziplex
Posts: 1256
Joined: Fri Jan 06, 2006 4:07 pm
Favourite Rod: zziplex
Favourite Reel: abu qtc mag
Favourite Fish: 150 gram lead weight
Location: wicklow

Re: Tapered Shockleader

#12 Post by AG »

JonandDave wrote:I know from a thread on another forum that tapered shockleaders are banned on any casting tounament and you must also have 8 turns on the reel with to drop set to max, for me if it aint safe on the field its not safe on the beach, a trick Dave Docwra taught me, t he picked up in the far east from people who make up rigs all day every day, was to use a drop of cooking oil to lubricate the knots, (they used pal oil but any ve oil will do) and really tighten them down with pliers on the tag end and then, as the knot is so tight and small you can blob the tails right up to the knot, the blob helps stop and slip and keeps you free of weed... stronger, safer, and shed loads cheaper than buying leaders and with practice, no worse than the knot you have to tie anyway with a tapered one. Expensive to crack off and loose a tapered leader plus line, plus all your terminal tackle...why risk it?

Cheers

Jon
spot on advice 8)
bigsod
SAI Megalodon!
Posts: 2458
Joined: Wed Jan 21, 2009 11:26 pm
Favourite Rod: Zziplex M4 evo
Favourite Reel: Diawa 7HT mag
Favourite Fish: Smoothounds
Location: Wherever the wind takes me.

Re: Tapered Shockleader

#13 Post by bigsod »

The blob knot gives a nice compact little knot, I use it with 70lb powerflex and its both safe and not a weed magnet. Ive had a few bad experiences with tapered shock and wont use it anymore.
Fire in the belly, ice in the veins
JonandDave

Re: Tapered Shockleader

#14 Post by JonandDave »

Another thing on the safety front is I know Dave Docwra is big on is not using swivels for the load bearing links to the rig and lead, as he says you the only way you know how stong a swivel actually is would be to test is to destruction, so always use oval rings and a Uni link clip, great for quick changing traces, stops sand abraiding the knot to the lead on retrieve and is far safer.

Return to “Casting”