I forgot take the anchors and chains out of the anchor locker before the winter, and now I have a few pale orange streaks over the white gel-coat from rusty run-off out of the locker drain holes. Tried all the obvious ways of getting it off, no result, so anybody got a magic trick?
Thinking about stainless steel chain "going forward", anybody know where I can get it at reasonable price?
Rust stains on hull
Moderators: JimC, jw
-
- SAI Hammerhead
- Posts: 269
- Joined: Thu Sep 16, 2010 2:34 pm
- Favourite Rod: Tubertini Gorilla Boat AP 350
- Favourite Reel: Daiwa 7ht Mag
- Favourite Fish: Bass!
- Location: Jabba Point
- Has thanked: 9 times
- Been thanked: 15 times
Re: Rust stains on hull
Try W5 limescale remover from Lidl, if that doesn't work Y-10 hull cleaner should do the trick. Can't help with regards to the chain though I'm afraid.
-
- Moderator
- Posts: 3083
- Joined: Wed Jan 29, 2003 5:18 pm
- Location: Cork
- Has thanked: 223 times
- Been thanked: 888 times
Re: Rust stains on hull
There are various products available from chandlers. I have used one called "gel kleen" and it is great. As said Y10 is a similar style thing.I think the main ingredient in most of these is oxalic acid so if you can get your hands on that you are flying!
As for the anchor chain... I have galvanised chain and have never suffered from rust. Is yours not galvo?
As for the anchor chain... I have galvanised chain and have never suffered from rust. Is yours not galvo?
-
- SAI Lug Worm
- Posts: 22
- Joined: Tue Aug 17, 2010 12:50 am
Re: Rust stains on hull
As posted,Y10 is the man to sort you out. I use it all the time and it`s amazing stuff. You can get it from Marine parts direct (Swords) along with any amount of chain.
-
- SAI Sea Dog!
- Posts: 904
- Joined: Sun Sep 02, 2007 11:02 am
- Has thanked: 71 times
- Been thanked: 170 times
Re: Rust stains on hull
Thanks for the tips gents, I'll get onto that right away.
They were, Jim, but not any more.... got two lengths from the local agri-coop, wont be buying there again....JimC wrote:As for the anchor chain... I have galvanised chain and have never suffered from rust. Is yours not galvo?
-
- SAC Treasurer
- Posts: 4331
- Joined: Tue Jun 29, 2004 1:47 pm
- Location: Too far from Water
- Has thanked: 141 times
- Been thanked: 150 times
Re: Rust stains on hull
You may have got Zinc coated chain.... not worth a toss
You should be fine with galvanised chain from a chandlers.
Kev

Kev
><º> ><º>
><º>
><º>