Penn 68 for casting

Shore angling - everything welcome! The opinions expressed here are those of the private individuals and we accept no responsibility or liability.

Moderator: donal domeney

Message
Author
Takca

Penn 68 for casting

#1 Post by Takca »

Hi All,
been reading around here for a few days and soaking up a lot of information,
I am looking for a bit of advice.

About 13 years ago I spent some time Boat angling and bought a Penn 68 and some
kind of boat rod with my confirmation money :-)

It got some use boat angling and has been mainly sitting up in a shed for the
last few years.

I hope to get back into angling again but perhapes from the shore mainly, my
main question is this

can this reel be used with a beachcaster or am I just asking for a endless mess
of birds nests? Was it only intended for boats?

This might be a silly question but do you need a shorter stronger spinning rod for
casting off rocks to cope with the strain when caughed on rock/weed?

If it can be used would I be able to use the same reel and switch the rods If I was
to go out on a boat? Or would I need to switch lines aswell?

Thanks All
User avatar
corbyeire
SAI Megalodon!
Posts: 6398
Joined: Wed Aug 24, 2005 5:47 pm
Favourite Rod: The one with all eyes
Favourite Reel: The working one
Favourite Fish: Flounder
Location: G g g galway
Has thanked: 1197 times
Been thanked: 336 times

Re: Penn 68 for casting

#2 Post by corbyeire »

im not familiar with the reel - but id say you could use it with a beachcaster if you are just casting 50 yards max and not trying to hit the horizon

as for the spining rod i would definitley go for a longer rod if its off rocks so you can pendulum fish in and also keep the tip down really low

having it stiffer or lighter is up to yourself really and the size of your expected catches more important for dealing with weed/rocks is your end tackle - the type of lures used or if bait fishing using rotten bottoms etc.

you could also use braid - but thats another story
User avatar
petekd
SAI Megalodon!
Posts: 4840
Joined: Fri May 06, 2005 5:46 pm
Favourite Rod: ZZiplex GB3 Lite
Favourite Reel: 7ht Mag
Favourite Fish: Big fat botties
Location: Cork
Has thanked: 29 times
Been thanked: 91 times

Re: Penn 68 for casting

#3 Post by petekd »

Hi, the penn 68 was one of the long beach series of multipliers. Dont be confused by the long beach term as it is most def a boat reel. I have one in the shed myself.

A half decent although very basic but bullet proof reel albeit with a horribly slow retrieve ratio. That reel would be a complete and utter nightmare to try and cast to be honest. Its far too big and wide and you will only be annoying yourself and opening up a whole world of pain for yourself. It would be fine legering baits down the side of a pier for conger or something but aside from the boat, thats about it.

For the sake of a few quid, go buy yourself a cheap fixed spool and take things from there until you get into it a bit more. 30 or 40 quid will get you started.
Fluff chucking is the new black..... Rampant Wreckfish is a fly angler in denial :D
User avatar
Mohawk
SAI Sea Dog!
Posts: 424
Joined: Tue Nov 28, 2006 7:37 pm
Has thanked: 2 times
Been thanked: 6 times

Re: Penn 68 for casting

#4 Post by Mohawk »

I have an old and I mean "old" Penn Long Beach 68 on a rental rod that still regularly lands blue sharks great old reel but useless for shore fishing its too big n slow, its only a small step down from a senator 6/0 in size 250m of 50lb mono only half fills the spool on it :shock: To cast with it would be a nightmare n you'll be for ever sorting out birds nests :wink:
[b][color=#0040FF]“Travel, Stay, Fish & Play”[/color][/b]
Takca

Re: Penn 68 for casting

#5 Post by Takca »

Thanks for the replies, looks like I need to get my hands on a reletivly cheap fixed spool reel. Once I figure out what I'm doing
and if I'm doing it right I'll post up any reports that might be usefull to others.

Thanks again
User avatar
nige
Wee Hours Boss!
Posts: 1621
Joined: Fri Oct 15, 2004 12:22 am
Location: was galway now landlocked and frozen Minneapolis
Has thanked: 50 times
Been thanked: 6 times

Re: Penn 68 for casting

#6 Post by nige »

you should look in the for sale section - viewforum.php?f=22 and see what is available
Takca

Re: Penn 68 for casting

#7 Post by Takca »

I have tried clicking that link but I get the message, "You are not authorised to read this forum."

do I need special permision to vew the forum?

I have gotten a loan of a rod and fixed spool from my father for the time being so wont be buying right away.

Thanks
User avatar
saltydog
SAI Megalodon!
Posts: 1816
Joined: Tue May 15, 2007 8:52 pm
Location: Galway / Wexford
Has thanked: 26 times
Been thanked: 20 times

Re: Penn 68 for casting

#8 Post by saltydog »

You need to have 50 posts made before you can get access to the "Fishing Tackle For Sale/Wanted section..... thats why you can't access the link...
Shore Species 2011 (31) Ballan Wrasse, Bass, Bullhuss, Coalfish, Cod, Conger, Corkwing Wrasse, Cuckoo Ray, Dab, Dogfish, Five Bearded Rockling, Flounder, Goldsinny Wrasse, Long Spined Sea Scorpion, Mackerel, Plaice, Pollack, Poor Cod, Pouting, Rock Goby, Shanny, Shore Rockling, Short Spined Sea Scorpion, Thornback Ray, Three Bearded Rockling, Tompot Blenny, Tope, Tub Gurnard, Turbot, Undulate Ray, Whiting

Shore Species 2010 (26) - Bass, Black Goby, Bull Huss, Coalfish, Cod, Dab, Dogfish, Five Bearded Rockling, Flounder, Grey Gurnard, Lesser Weaver, Mackerel, Mullet, Plaice, Pollack, Poor cod, Pouting, Rock Goby, Shore Rockling, Silver eel, Starry Smooth Hound, Thornback Ray, Tope, Tub Gurnard, Turbot, Whiting

[url=http://galwaybuccaneerssac.com]Galway Buccaneers SAC[/url]
User avatar
nige
Wee Hours Boss!
Posts: 1621
Joined: Fri Oct 15, 2004 12:22 am
Location: was galway now landlocked and frozen Minneapolis
Has thanked: 50 times
Been thanked: 6 times

Re: Penn 68 for casting

#9 Post by nige »

saltydog wrote:You need to have 50 posts made before you can get access to the "Fishing Tackle For Sale/Wanted section..... thats why you can't access the link...


that has changed - think its only 5 post now
Takca

Re: Penn 68 for casting

#10 Post by Takca »

Ok, cool, I might be able to see it soon so :-)

Return to “Shore Angling Q&A / Forum”