Joining Braid to Braid

Come on now, ante up! Give us your tips and tricks, those little snippets and trade secrets gleaned from years of experience and experimentation!

Moderator: Seaniebo

Message
Author
User avatar
Paul B
SAI Hammerhead
Posts: 221
Joined: Fri Oct 26, 2007 7:08 pm
Location: Dublin

Joining Braid to Braid

#1 Post by Paul B »

Anyone know the best knot to join the two...I Need it to be very strong as we will be fishing in Norway next week !!!! :wink: :wink:
Mr_Green

#2 Post by Mr_Green »

I use double grinners, maybe even triple...ive had tope caught using double grinners, braid to mono...which is harder than braid to braid..so u should be fine using that...best of luck buddy
User avatar
Paul B
SAI Hammerhead
Posts: 221
Joined: Fri Oct 26, 2007 7:08 pm
Location: Dublin

#3 Post by Paul B »

Thanks for that Mr G ...I use the albright knot for mono to braid but wasn't to sure about braid to braid !!
User avatar
MAC
SAC Treasurer
Posts: 4331
Joined: Tue Jun 29, 2004 1:47 pm
Location: Too far from Water

#4 Post by MAC »

Hi Paul,

I've tried the double grinner route..... No use, I've also had tope on this outfit, but the knot parted under moderate tension after only a little while.

I am still looking for a knot, so if you find one please post here. I picked up a bulk spook of Stren Microfuse (1100 yards) So I just spooled the whole reel.....

Kev
><º> ><º>

><º>
User avatar
Paul B
SAI Hammerhead
Posts: 221
Joined: Fri Oct 26, 2007 7:08 pm
Location: Dublin

#5 Post by Paul B »

Kevin,

Yeah i've just tested that knot and there is no way it will stand up to Norway's test.I want to join 125yds braid onto 300 yds of braid but I cannot seem to find a knot anywhere on the www. HELP !!!!!
gannet
SAI Hammerhead
Posts: 227
Joined: Thu Mar 23, 2006 8:51 pm

#6 Post by gannet »

Try the Double Grinner with six turns per side, works for me.
paulocallaghan

#7 Post by paulocallaghan »

useless with names of knots but il try describe what i do.

i tied a bemini twist in the line already on the reel and then used whatever the knot u use for attacking hooks to snoods is called.. think its called a grinner knot.

havent had any problems with it. used it last year in cahore fishing for ray and huss and had no problems with it.
Mr_Green

#8 Post by Mr_Green »

forgot to mention the spider hitch has to go in mainline first, then use the double or triple grinner... tie the spider hitch extra strong with a few more turns...
BRIAN DUGGAN
SAI Bait Ball
Posts: 63
Joined: Wed Feb 07, 2007 7:37 pm
Location: CORK CITY

Re braid

#9 Post by BRIAN DUGGAN »

I find the double grinner works very well,the one thing you need to make sure of is that the two ends of the knot pull together correctly,any overlaps will weaken the knot for sure.
User avatar
JOHN1
SAI Megalodon!
Posts: 3462
Joined: Tue Jan 09, 2007 12:59 am
Location: South Co. Dublin

#10 Post by JOHN1 »

JAYSUS its seems to very early going to norway.
i would be more concearned about how to keep warm this time of year :shock: it should be nice and cold.
i dont think the fishing really kicks in untill around april.
all the best and tight lines.
dont for get to post the results :wink:
if you know how to join braid to mono you could always use a patch line between the two . what i mean is use say about 20ft of mono line between the two braids this will also act as a shock absorber when wou catch a monster in seriousley deep water. :wink:
User avatar
Paul B
SAI Hammerhead
Posts: 221
Joined: Fri Oct 26, 2007 7:08 pm
Location: Dublin

#11 Post by Paul B »

I tied back to back uni knots and tested against a 15lb drag worked no problem..thanks for all the help lads.

The BIG cod come down to spawn from Jan until March in the fjord's around Bodo thats why we are going this Friday.There is also a lot of Halibut in the same area so Fingers Crossed !!!!
User avatar
roger de dodger
SAI Megalodon!
Posts: 5651
Joined: Tue Jan 02, 2007 6:15 pm
Favourite Fish: skimmers
Location: bray co.wickla

#12 Post by roger de dodger »

grinner to grinner with 10 turns on each side are you using greasy braid like powerpro they are more prone to slipping especialy the lighter ones
EAST COAST BAITBUCKET RAIDER,

thornback specialist
User avatar
MAC
SAC Treasurer
Posts: 4331
Joined: Tue Jun 29, 2004 1:47 pm
Location: Too far from Water

#13 Post by MAC »

I had my double grinner slipping with Power pro... only after a few fish though.... so keep an eye on it.

Kev
><º> ><º>

><º>
User avatar
jw
SAI Megalodon!
Posts: 1170
Joined: Sun Jul 02, 2006 7:48 pm
Location: dublin

#14 Post by jw »

paul,

if i was going all the way to norway i would spool the reel with new braid. A big fish thrashing and lunging on the line will find any weakness and smash it there.
in my view it would be false economy to save a few quid on the braid and then lose a fish

if you do decide to risk it, i reckon a meter of mono between the braids would be best.
User avatar
Paul B
SAI Hammerhead
Posts: 221
Joined: Fri Oct 26, 2007 7:08 pm
Location: Dublin

#15 Post by Paul B »

Cheers for the tips lads as I posted above I have joined 125yds on to 300 yds using back to back uni's I'll keep an eye on the knot but I have tested it on 15lb drag and it seems to be fine.

If all else fails I'll reattach in Norway using a length of 50lb Mono !!!
TaiwanTuna
SAI Lug Worm
Posts: 6
Joined: Tue Feb 26, 2008 9:36 pm
Location: Southern California, US

#16 Post by TaiwanTuna »

greetings from California,
if you have room for one more, i thought i'd jump in and throw in my 2 cents. out here on the west coast we tend to join braid to braid with albright when the diameters are very different, say 130lb on the spool with 50lb leader. this is how i'll tie for my bottom fishing trips (350ft depth), actually - 130 braid to 25yd of 50 braid to 5 ft of 50 mono to soften the initial strike.

for all purpose join most anglers favor the double uni knots, looks like they're called the double grinner?

just out of curiosity, what are you fishing for in norway? what tackle are you using?

edit: here's a link to several popular knots we use out here. http://www.animatedknots.com/indexfishi ... dknots.com[/url]
User avatar
Paul B
SAI Hammerhead
Posts: 221
Joined: Fri Oct 26, 2007 7:08 pm
Location: Dublin

#17 Post by Paul B »

Just got back from Norway...The knot held just fine.We had Cod up to 23lbs...Plaice up to 7lbs...Halibut up to 10lbs.All in all the fishing was Magic !!!!!
User avatar
nialler
SAI Hammerhead
Posts: 313
Joined: Fri Sep 29, 2006 3:31 pm
Favourite Fish: Marlin
Location: Donabate

#18 Post by nialler »

Alan Dunne was telling me you got some clonkers Paul, any pics?
Men and fish are alike. They both get into trouble when they open their mouths.
User avatar
Paul B
SAI Hammerhead
Posts: 221
Joined: Fri Oct 26, 2007 7:08 pm
Location: Dublin

#19 Post by Paul B »

Here's a few for ya Niall !!!
You do not have the required permissions to view the files attached to this post.
User avatar
Paul B
SAI Hammerhead
Posts: 221
Joined: Fri Oct 26, 2007 7:08 pm
Location: Dublin

#20 Post by Paul B »

A few More !!!
You do not have the required permissions to view the files attached to this post.

Return to “Tips & Tricks for Sea Anglers”