bullhuss
Moderator: donal domeney
-
paulocallaghan
-
lumpy
- SAI Megalodon!
- Posts: 1474
- Joined: Mon Nov 21, 2005 6:22 pm
- Favourite Rod: conoflex nemesis plus slr
- Favourite Reel: Daiwa SL30SHV
- Favourite Fish: Bull Huss, flounder
- Location: clonakilty, co cork
- Been thanked: 13 times
no problem, best of luck with them. if you get a few it can become addictive...
shore species 2008(25):dogfish(3.1lbs), bull huss (12lb 2oz), bass, shore rockling, coalie, whiting, pollack, conger (22.4lbs),flounder, thick lipped mullet (4.8lbs),turbot,ling (11.2lbs),ballan wrasse(4.5lbs), cuckoo wrasse, pouting, poor cod, cod (9.5lbs), dab, 3 bearded rockling, long spined scorpion fish, corkwing wrasse, plaice, trigger fish, sea trout, garfish
regards neil
regards neil
-
paulocallaghan
-
lumpy
- SAI Megalodon!
- Posts: 1474
- Joined: Mon Nov 21, 2005 6:22 pm
- Favourite Rod: conoflex nemesis plus slr
- Favourite Reel: Daiwa SL30SHV
- Favourite Fish: Bull Huss, flounder
- Location: clonakilty, co cork
- Been thanked: 13 times
paul
i use 1.6mm stainless tig welding wire..i get mine through me da from a welding supply company. think its around 50e for about 90 1m lengths in a tube. i use it for my grip leads as well. saynig this any stainless wire will do but i would go for 1.6mm and above as below it hasnt high enough tensile strength
i use 1.6mm stainless tig welding wire..i get mine through me da from a welding supply company. think its around 50e for about 90 1m lengths in a tube. i use it for my grip leads as well. saynig this any stainless wire will do but i would go for 1.6mm and above as below it hasnt high enough tensile strength
shore species 2008(25):dogfish(3.1lbs), bull huss (12lb 2oz), bass, shore rockling, coalie, whiting, pollack, conger (22.4lbs),flounder, thick lipped mullet (4.8lbs),turbot,ling (11.2lbs),ballan wrasse(4.5lbs), cuckoo wrasse, pouting, poor cod, cod (9.5lbs), dab, 3 bearded rockling, long spined scorpion fish, corkwing wrasse, plaice, trigger fish, sea trout, garfish
regards neil
regards neil
-
kieran
- Site Admin/Owner
- Posts: 2511
- Joined: Wed Jan 15, 2003 11:27 pm
- Location: Mayo, Ireland
- Has thanked: 112 times
- Been thanked: 246 times
huss hunting
lumpy wrote:... tide wise ive noticed 2 major patterns, first is that over high water ..low water is similar...
bait i have found that a mackeral(ive found frozen to much outfish fresh,happened too many times to be co-incidental) that has been cut in half and the head end made into a mini flapper scores best
pulleys in my opinion are the only rig to use.... dont be afraid to cast close. a buddy of mine took an 8 pounder on a 10 yard cast into a gulley last year.
Excellent advice there lumpy and bang on my experience here in Clew Bay. Huss are scavengers and not great swimmers so they like to ride in on weaker tidal flows, almost letting the tide bring them along and they hunt mostly by scent. They are scavengers so anything a bit off is good. Old lugworm in a squid pocket that are too long in the freezer are king - I freeze them down when I have busted lug for cod fishing in the winter but for cod you need to use them freshly frozen. As for ground we find them in weedy mixed ground, foul ground is better but a lot more hassle and exactly as you say, the deeper, the fouler, the bigger the fish...
Dogs with attitude and serious strength. Handle them very lightly and they are not that bad - if you squeeze or pinch them, watch out! :wink:
FWIW
Kieran Hanrahan
Time spent fishing is never time wasted...
2015 targets - a triggerfish, a specimen bass, a three bearded rockling to complete the set and something big and toothy from certain north Mayo deep water marks
Time spent fishing is never time wasted...
2015 targets - a triggerfish, a specimen bass, a three bearded rockling to complete the set and something big and toothy from certain north Mayo deep water marks