frozen lug how best to use it?
Moderator: donal domeney
-
patk
- SAI Sea Dog!
- Posts: 540
- Joined: Wed Oct 17, 2007 2:06 pm
- Location: CORK
- Has thanked: 13 times
- Been thanked: 34 times
frozen lug how best to use it?
I have bought frozen lug many times and indeed the first time i bought it the guy in the tackle shop said it was the fillet steak of bait! But every time I have it i lose confidence in it for a number of reasons. Firstly when i put the worm on the hook. I slide it all the way up the hook and line and then put a piece of razor/squid/mack on the bend of the hook with elastic to keep it slipping off. It looks like nothing like a worm! when I reel in it looks like a sausage skin! So basically for quite a bit of money Im using something I dont have much confidence in> Am I using it in the right way any tips or methods of using it i should try?
-
KK
- SAI Sea Dog!
- Posts: 441
- Joined: Tue Oct 24, 2006 1:07 pm
-
EoinMag
- SAI Sea Dog!
- Posts: 528
- Joined: Mon Oct 30, 2006 8:07 pm
-
paulocallaghan
never had any luck with it til i was told how to use it properly:
run the blade of a sharp knife/ scissors up the middle of the worm, leaving you with a sheet of lug.
cut into small sections of about 2-4 cms long and use to tip baits such as crab legs, maddies, fish etc. works well for flatties, codling coalies etc etc
run the blade of a sharp knife/ scissors up the middle of the worm, leaving you with a sheet of lug.
cut into small sections of about 2-4 cms long and use to tip baits such as crab legs, maddies, fish etc. works well for flatties, codling coalies etc etc
-
JOHN LYNCH
- Inactive
- Posts: 660
- Joined: Thu Mar 30, 2006 1:55 pm
- Location: AnglingIreland.com TackleBox.ie
- Has thanked: 8 times
- Been thanked: 2 times
Normally use it as a scratching bait tipped off with mack or maddies. As the lads said a 2" section cut and then slid onto a baiting needle and whiped with bait elastic works.
Another way is to again cut a 2" section and nip the hook point through a few mm's from the top, then twist the section of black around a few times and pass the hook through again, repeat this 3-4 times and you get a bit that will not slip down the hook point into a lump of slop.
You should get a good 4-5 scratching baits per worm. Excellent this time of the year for many species. Hope this helps.
Another way is to again cut a 2" section and nip the hook point through a few mm's from the top, then twist the section of black around a few times and pass the hook through again, repeat this 3-4 times and you get a bit that will not slip down the hook point into a lump of slop.
You should get a good 4-5 scratching baits per worm. Excellent this time of the year for many species. Hope this helps.
-
corbyeire
- SAI Megalodon!
- Posts: 6398
- Joined: Wed Aug 24, 2005 5:47 pm
- Favourite Rod: The one with all eyes
- Favourite Reel: The working one
- Favourite Fish: Flounder
- Location: G g g galway
- Has thanked: 1197 times
- Been thanked: 336 times
nah its a thin piece of metal hollow one end to stick onto the pointed end of the hook - the other end is pointed and you stick the worms on there
can bang on 3 on the needle first and then easily glide them onto the hook
great for hammering on a ball of lug
:D
can bang on 3 on the needle first and then easily glide them onto the hook
great for hammering on a ball of lug
:D
catch and release!
https://secure.avaaz.org/en/petition/IR ... Y/?wiWKHib
https://www.facebook.com/galwaybaysac/
https://www.facebook.com/connaughtseaangling/
[color=#0000BF]AKA Frank Ryder [/color]
https://secure.avaaz.org/en/petition/IR ... Y/?wiWKHib
https://www.facebook.com/galwaybaysac/
https://www.facebook.com/connaughtseaangling/
[color=#0000BF]AKA Frank Ryder [/color]
-
Conor P